Report on financial feasibility of proposed Puget Sound Bridge: capital costs, potential traffic, future revenues, and methods of financing. Prepared for the Washington Toll Bridge Authority and the Washington State Legislature Joint Fact-Finding Committee on Highways, Streets and Bridges.

Mode of access: Internet.

Report on financial feasibility of the proposed southern crossing of San Francisco Bay. Prepared for State of California, Dept. of Public Works.

Mode of access: Internet.

Financial feasibility assessment manual for rural health care facilities /

"October 1983."

Meeting the challenge of establishing commercial mohair enterprises by building an interactive enterprise management and financial model

To assist in attracting investors into mohair production in Australia, a production and financial model was built as a learning and support tool. The work aimed to reduce search time and thinking costs about the impact of management strategies on financial feasibility. Various management strategies and assumptions applied to a case study with 300 breeding Angora does and eight variations. The results showed an internal rate of return for mohair ranging from 9.3% to 21.2% over 12 years, a median gross margin per effective hectare ranging from $82 to $167, cash at bank in year 12 ranging from $8,700 to $56,800 and net enterprise assets ranging from $69,900 to $155,700. A key benefit of the model was its ability to allow new farmers to explore potential management strategies and their assumptions about a future enterprise before investing.

A method for systematically pooling data in very early stage construction price forecasting

Client owners usually need an estimate or forecast of their likely building costs in advance of detailed design in order to confirm the financial feasibility of their projects. Because of their timing in the project life cycle, these early stage forecasts are characterized by the minimal amount of information available concerning the new (target) project to the point that often only its size and type are known. One approach is to use the mean contract sum of a sample, or base group, of previous projects of a similar type and size to the project for which the estimate is needed. Bernoulli’s law of large numbers implies that this base group should be as large as possible. However, increasing the size of the base group inevitably involves including projects that are less and less similar to the target project. Deciding on the optimal number of base group projects is known as the homogeneity or pooling problem. A method of solving the homogeneity problem is described involving the use of closed form equations to compare three different sampling arrangements of previous projects for their simulated forecasting ability by a cross-validation method, where a series of targets are extracted, with replacement, from the groups and compared with the mean value of the projects in the base groups. The procedure is then demonstrated with 450 Hong Kong projects (with different project types: Residential, Commercial centre, Car parking, Social community centre, School, Office, Hotel, Industrial, University and Hospital) clustered into base groups according to their type and size.

Design a zero energy house in Brisbane, Australia

Due to the increasing energy demand and global warming effects, energy efficient buildings have become increasingly important in the modern construction industry. This research is conducted to evaluate the energy performance, financial feasibility and potential energy savings of zero energy houses. Through the use of building computer simulation technique, a 5 stars energy rated house was modelled and validated by comparing the energy performance of a base case scenario to a typical house in Brisbane. By integrating energy reduction strategies and utilizing onsite renewable energy such as solar energy, zero energy performance is achieved. It is found that approximately 66 % energy savings can be achieved in the household annual energy usage by focusing on maximizing the thermal performance of building envelope, minimizing the energy requirements and incorporating solar energy technologies.

Drivers of the accuracy of developers' early stage cost estimates in residential construction

Purpose – Preliminary cost estimates for construction projects are often the basis of financial feasibility and budgeting decisions in the early stages of planning and for effective project control, monitoring and execution. The purpose of this paper is to identify and better understand the cost drivers and factors that contribute to the accuracy of estimates in residential construction projects from the developers’ perspective. Design/methodology/approach – The paper uses a literature review to determine the drivers that affect the accuracy of developers’ early stage cost estimates and the factors influencing the construction costs of residential construction projects. It used cost variance data and other supporting documentation collected from two case study projects in South East Queensland, Australia, along with semi-structured interviews conducted with the practitioners involved. Findings – It is found that many cost drivers or factors of cost uncertainty identified in the literature for large-scale projects are not as apparent and relevant for developers’ small-scale residential construction projects. Specifically, the certainty and completeness of project-specific information, suitability of historical cost data, contingency allowances, methods of estimating and the estimator’s level of experience significantly affect the accuracy of cost estimates. Developers of small-scale residential projects use pre-established and suitably priced bills of quantities as the prime estimating method, which is considered to be the most efficient and accurate method for standard house designs. However, this method needs to be backed with the expertise and experience of the estimator. Originality/value – There is a lack of research on the accuracy of developers’ early stage cost estimates and the relevance and applicability of cost drivers and factors in the residential construction projects. This research has practical significance for improving the accuracy of such preliminary cost estimates.

Kohti hyvää suometsien hoitoa : harvennusten ja kunnostusojitusten vaikutus ojitusaluemänniköiden puuntuotokseen ja metsänkasvatuksen taloustulokseen

This thesis examines the impacts of silvicultural activities on productivity and financial returns of Scots pine (Pinus sylvestris L.) stands on drained peatlands in Finland. The effects of ditch network maintenance operations (DNM) and thinnings, with different timings and intensities, were studied. Based on stand development simulations, the best regimes for different types of stands according to site type, climatic area, and stand silvicultural status were defined from the viewpoint of both wood production and financial profitability. Certain aspects affecting the management outcomes, such as the timing of the first thinning, were examined using data from thinning experiments. Long-term predictions of the impacts of different management regimes were carried out by simulating the development of well-representative model-stands which were composed from appropriate inventory data sets. The MOTTI stand simulator used to perform the simulations enables the predictions by utilizing specific models for drained peatland stands. In addition to natural stand dynamics, these models describe the effects of silvicultural treatments on the development of a given stand. The mean annual increment of merchantable wood (MAImerch) was used as the measure of wood productivity, and the financial feasibility of the regimes was compared using net present value (NPV) analysis. Silvicultural treatments, when applied to appropriately match stand condition, increased both the productivity and financial returns of stand management. Applying DNM resulted in a small increase in MAImerch. When thinning was introduced along with DNM, their combined effect on wood productivity was considerable. According to current operational practices, DNM is generally combined with thinning. In some cases, e.g., in sites of low productivity, the need for DNM may become apparent prior to the thinning stage. As for profitability, thinnings proved to be crucial. The regimes with heavy and late thinnings were generally more profitable than those with normal thinnings. Further, early thinning (relative to stand volume) lacked appeal when seeking a financially profitable removal from the first thinning. In young stands with an initially poor silvicultural condition, however, applying even a low-yielding first thinning considerably increased the NPV when compared to a regime with no thinning at all. Generally, the regimes resulting in the best profitability included heavier thinnings and fewer DNM and thinning treatments than did the regimes resulting in the best yield results. This study demonstrates considerable potential for profitable wood production-oriented management in pine stands on drained peatlands despite their challenging circumstances and long rotations. The results can be used for defining new and more site-specific silvicultural guidelines for various types of drained, pine-dominated peatland stands within the entire range of boreal conditions.

Enhancing Seed Availability For the Hard Clam (Mercenaria mercenaria) Aquaculture Industry By Applying Remote Setting Techniques

The goal of this study was to test a technology that may help ensure a reliable and consistent supply of high quality and inexpensive clam seed to growers, thus fostering an emerging aquaculture industry by eliminating a seed shortage that limits sustainability. The overall objectives were to develop, test and demonstrate technical procedures and determine the financial feasibility of transferring remote setting technology from the Pacific Northwest molluscan shellfish industry to the hard clam aquaculture industry in Florida. (PDF has 44 pages.)

A presença da ortodontia no SUS: a experiência de CEOs e de outros serviços públicos de saúde bucal

A assistência ortodôntica, que de forma incipiente, já se fazia presente no SUS, foi revigorada com a criação dos Centros de Especialidades Odontológicas (CEOs) pela Política Nacional de Saúde Bucal (PNSB), lançada em 2004. No entanto, as informações acerca dos dados dessa assistência ainda permaneciam desconhecidas. Surgiram então as questões: onde se localizam os centros que englobam esse tipo de atenção? Como se desenvolve a prática ortodôntica nesses locais? Quais são os problemas presentes neste processo? Neste sentido, a descoberta de respostas a essas perguntas, constituiu-se no objeto desta tese. Investigar a localização dos CEOs e outros centros de saúde bucal de todo o país que prestam serviços ortodônticos; lançar um olhar sobre a Saúde Pública dos municípios que os sediam; observar o modus operandi dessas ações ortodônticas. Em seguida, em um exercício prospectivo, discutir os caminhos para incrementá-las tornando-as mais efetivas. Através das Coordenações Estaduais de Saúde Bucal (CESBs), foram localizados todos os serviços ortodônticos públicos do país; em seguida solicitou-se junto aos gestores e/ou gerentes dos mesmos informações relativas ao que acontece em termos de programação ortodôntica intramuros. Foram detectados 42 serviços públicos de Ortodontia presentes em 39 municípios de todo o Brasil. Os dados obtidos referentes ao atendimento ortodôntico foram analisados e mostraram problemas na ordem de recursos humanos, de financiamento, de triagem e referência além da ausência de um protocolo clínico abrangente, norteador dessas ações. Apontou-se assim na direção de se discutir nova idéias acerca dessas questões. A Ortodontia definitivamente está em pauta no SUS e, por ser uma experiência um tanto quanto incipiente, carece de alguns ajustes. Ajustes esses discutidos em um protocolo de conduta adaptável à realidade de cada município. Neste protocolo são apontados elementos indicadores de uma maior eficácia técnica e uma maior viabilidade política e financeira no processo de aproximação Ortodontia -SUS.

The potential for thermal energy recovery from wastewater treatment works in Southern England

There is potential to extract energy from wastewater in a number of ways, including: kinetic energy using micro-hydro systems, chemical energy through the incineration of sludge, biomass energy from the biogas produced after anaerobic sludge digestion, and thermal energy as heat. This paper considers the last option and asks how much heat could be recovered under UK climatic conditions and can this heat be used effectively by wastewater treatment plants to reduce their carbon footprint? Four wastewater treatment sites in southern England are investigated and the available heat that can be recovered at those sites is quantified. Issues relating to the environmental, economic and practical constraints on how energy can be realistically recovered and utilised are discussed .The results show there is a definite possibility for thermal energy recovery with potential savings at some sites of up to 35,000 tonnes of total long-cycle carbon equivalent (fossil fuel) emissions per year being achievable. The paper also shows that the financial feasibility of three options for using the heat (either for district heating, sludge drying or thermophilic heating in sludge digestion processes) is highly dependant upon the current shadow price of carbon. Without the inclusion of the cost of carbon, the financial feasibility is significantly limited. An environmental constraint for the allowable discharge temperature of effluent after heat-extraction was found to be the major limitation to the amount of energy available for recovery. The paper establishes the true potential of thermal energy recovery from wastewater in English conditions and the economic feasibility of reducing the carbon footprint of wastewater treatment operations using this approach.

Researcher practices on returning genetic research results.

BACKGROUND/AIMS: as genetic and genomic research proliferates, debate has ensued about returning results to participants. In addition to consideration of the benefits and harms to participants, researchers must also consider the logistical and financial feasibility of returning research results. However, little data exist of actual researcher practices. METHODS: we conducted an online survey of 446 corresponding authors of genetic/genomic studies conducted in the United States and published in 2006-2007 to assess the frequency with which they considered, offered to, or actually returned research results, what factors influenced these decisions, and the method of communicating results. RESULTS: the response rate was 24% (105/446). Fifty-four percent of respondents considered the issue of returning research results to participants, 28% offered to return individual research results, and 24% actually returned individual research results. Of those who considered the issue of returning research results during the study planning phase, the most common factors considered were whether research results were deemed clinically useful (18%) and respect for participants (13%). Researchers who had a medical degree and conducted studies on children were significantly more likely to offer to return or actually return individual results compared to those with a Ph.D. only. CONCLUSIONS: we speculate that issues associated with clinical validity and respect for participants dominated concerns of time and expense given the prominent and continuing ethical debates surrounding genetics and genomics research. The substantial number of researchers who did not consider returning research results suggests that researchers and institutional review boards need to devote more attention to a topic about which research participants are interested.

Reabilitação de um imóvel industrial em Marvila: projeto de investimento

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil

Criação de um negócio de comércio electrónico com base em marketing de rede

Projeto de Mestrado apresentado ao Instituto Superior de Contabilidade e Administração do Porto, para obtenção do Grau de Mestre em Empreendedorismo e Internacionalização, sob orientação da Professora Doutora Ana Azevedo